NOS
"NOS" format conforms to NOS requirements for its tidal stations. The label assigned in the
telemetry setup block is used to identify to the formatter the different sensors that must be
included in the message. You must put the proper labels for each sensor or the formatter will not
be able to locate the sensor to transmit it. The labels are as follows:
Station Datum
Sensor offset
Primary water level
Aquatrak sigma
Aquatrak outlier cnt.
Aquatrak temp. 1
Aquatrak temp. 2
Wind speed
Wind direction
Wind gust
Air temperature
Water temperature
Barometric pressure
Battery voltage
NFDRS
"NFDRS" format conforms to NFDRS requirements for its fire weather stations.
00.00
000
270
328
110
100
14.0
000
000
020
0486
Telemetry setup block labels tell the formatter how to format the data:
Sensor
309
Bringing the Benefits of Real-Time Data Collection to the World
Label
Sutron Corporation, Tel: 703-406-2800,
DAT
SNS
WL
SIG
OUT
AQT1
AQT2
WS
WD
GST
AT
WT
BP
BAT
Format
http://www.sutron.com
Need help?
Do you have a question about the Xpert2 and is the answer not in the manual?