Sutron Xpert2 Operation And Maintenance Manual page 303

SHUTDOWN
SMS [cmd]
STARTUP
STATION [name]
STATUS [clear]
STOP name
TASKS
TIME [hh:mm:ss]
TYPE file [/C]
293
Bringing the Benefits of Real-Time Data Collection to the World
H - high limit exceeded
L - low limit exceeded
D - rate of change exceeded
Causes the Xpert program to exit so that Xpert.exe, DLLs,
and SLLs may be upgraded.
The SMS command allows commands normally issued via
SMS text message to be issued at the command line. If cmd is
omitted, the current state of the GPRS modem is displayed,
example:
\Flash Disk>SMS
GPR2: Standby-On next task SelfTimed at 17:30:05
NextST:17:30:05 LastAlarm:16:39:15
LastST:17:15:05
SMS2: Standby
Otherwise cmd is processed as follows:
STAP [url[:port]]
REDIR [url[:port]]
SETPIP [url]
SETSIP [url]
SETMP [port]
SETCP [port]
SETRP [port]
HELP
Runs Xpert.exe from the \Flash Disk folder if it's there,
otherwise from the \Windows folder. Updates the
AUTOEXEC.BAT if the location has moved.
The STATION command will display a station's name. If a
name is passed to the command, then the station name will be
set and the change will take effect immediately.
Display and or clear com port status
Stops a process forcibly
Displays tasks and heap usage
Displays or sets the time
Display a file to the screen. If the file is longer than 24 lines
the display will pause with a "– More – " prompt until enter is
Sutron Corporation, Tel: 703-406-2800,
Perform a "shoulder tap" by opening a
GPRS connection to either the default
command server or the specified url
and port
Open a GPRS connection to the default
redirector server or the specified
url and port
Set the PrimaryIP for GPRS connections
Set the SecondaryIP for GPRS
connections
Set or show the TCP port to be used
for GPRS messages
Set or show the default TCP port to be
used for GPRS command sessions
Set or show the default TCP port to be
used for GPRS Redirector sessions
Displays this list
http://www.sutron.com