Triumph T595 Daytona Owner's Handbook Manual page 67

1. Vertical Adjustment Screw (LH)
2. Horizontal Adjustment Screw (LH)
HEADLIGHTS - DAYTONA
A
WARNING:
speed to suit the visibility and
weather conditions in which the
motorcycle is being operated.
Ensure that the beam is adjusted to
illuminate
the
sufficiently far ahead without
dazzling oncoming traffic. An
incorrectly adjusted headlight may
impair visibility causing an accident.
A
WARNING: Never attempt to
adjust the headlamp beam
when the motorcycle is in motion.
Any attempt to adjust the headlamp
beam when the motorcycle is in
motion may result in loss of control
and an accident.
Maintenance and Adjustment
Adjust road
road
surface
1. Vertical Adjustment Screw (RH)
2. Horizontal Adjustment Screw (RH)
Headlight Adjustment
Each headlight can be adjusted by
means of vertical and horizontal
adjustment screws located on the
rear of the headlight unit.
Switch the headlight dipped beam on.
Turn the vertical adjustment screw on
each headlight clockwise to lower the
beam or anti-clockwise to raise the
beam.
On the RH headlight turn the
horizontal
clockwise to move the beam to the
right or anti-clockwise to move the
beam to the left.
On the LH headlight turn the
horizontal
anti-clockwise to move the beam to
the right or clockwise to move the
beam to the left.
Switch the headlights off when the
beam settings are satisfactory.
Page 66
adjustment screw
adjustment screw