Triumph T595 Daytona Owner's Handbook Manual page 55

Wheel Bearings inspection
If the wheel bearings in the front or rear
wheel allow play in the wheel hub, are noisy,
or if the wheel does not turn smoothly, have
your authorised Triumph dealer inspect the
wheel bearings.
The wheel bearings must be inspected at
the intervals specified in the scheduled
maintenance chart.
Gently rock the top of the front wheel
l
from side to side.
If any free-play can be detected, ask
l
your authorised Triumph dealer to
inspect and rectify any faults before
riding.
Reposition the lifting device and
l
repeat for the rear wheel.
A
WARNING: Operation with
worn or damaged wheel
bearings may cause impaired
handling and instability leading to an
accident. If in doubt, have the
inspected
motorcycle
authorised Triumph dealer before
riding.
.
Remove the support and place the
motorcycle on the side stand.
Refit the belly panel (where fitted).
l
Maintenance and Adjustment
by an
FRONT SUSPENSION
All models are fitted with forks which are
adjustable for spring pre load, compression
damping and rebound damping.
Front Fork Inspection
Examine each fork stanchion for any
l
sign of damage, scratching of the
slider surface, or for oil leaks.
If any damage or leakage is found
l
consult an authorised Triumph
dealer.
To check that the forks operate smoothly:
Position the motorcycle on level
l
ground.
While holding the handlebars and
l
applying the front brake, pump the
forks up and down several times.
NOTE:
The suspension movement will be
l
affected by adjustment settings.
If roughness
l
stiffness is detected, consult your
authorised Triumph dealer.
Page 54
or excessive