Table of Contents
Advertisement
SETTINGS
1. In
mode, keep [A] pressed to enter/exit
time
2. Rotate [A] to change the values.
3. Press [A] to accept.
4. Press [B] or [C] or keep [A] pressed to exit.
TIME/ALTITUDE RECORDING
Press [B] to switch between
STOPWATCH (CHRONOGRAPH)
1. In
mode, rotate [A] upwards to toggle between stopwatch
time
and date.
2. Press [A] to start/stop the stopwatch.
3. Keep [C] pressed to reset the existing time.
COMPASS
•
Press [C] to enter.
•
Keep [C] pressed to start the compass calibration.
•
While calibrating compass, keep the device level and stabile when
rotating. 'Level' blinks on the display if the device is not level or
stabile.
•
Press [B] or [C] to exit compass.
and
time
altitude recording
.
settings
mode.
Hide quick links:
Advertisement
Table of Contents
