Recording Altitude; Setting Reference Altitude - Suunto ELEMENTUM TERRA User Manual

2.2.1 Recording altitude

When you are in mode or record altitude measurements,
ALTITUDE RECORDING
the watch measures altitude changes at an interval of 1, 5 or 10 seconds
(depending on vertical speed).
TIP: Use mode to see immediate altitude changes.
ALTITUDE RECORDING

2.2.2 Setting reference altitude

The altitude reading is based on the measurement of the barometric pressure.
The barometric pressure changes with weather, so if the weather conditions
change, it is advisable to reset the current reference altitude more often, at
least before you start your journey.
To set the reference altitude:
1. In mode, keep [A] pressed.
TIME
2. Rotate [A] to change the reference altitude.
3. Keep [A] pressed or press [B] or [C] to accept the change and exit.
NOTE: The outer rim segment is the sea level air pressure indicator
corresponding to the altitude reading.
10