Invacare Zoom 220 Owner's Operator And Maintenance Manual page 46

SECTION 11—TRANSPORTING
4. Grasp the front frame assembly on either side and slide the front frame assembly onto
the rear frame assembly.
NOTE: Lifting the front frame assembly slightly may help slide the front and rear frame assemblies
together.
5. Flip down the frame lock pin to the horizontal, locked position.
6. Install the battery box. Refer to Refer to Removing/Installing the Battery Box on
page 41.
7. Install the seat. Refer to Removing/Installing the Deluxe Seat on page 31 or Removing/
Installing/Adjusting the Padded Seat on page 29.
Refer to Removing/
Installing the Battery Box
on page 41.
Frame Post
Rear Frame
Assembly
NOTE: Scooter with Deluxe Seat option shown. Scooter with Padded
Seat option disassembles in the same way.
Zoom 220
Front Frame
Assembly
FIGURE 11.1 Transporting the Scooter
46
Refer to Removing/Installing
the Deluxe Seat on page 31.
Frame Lock Pin
(in Unlocked Position)
Frame Lock Pin
(in Locked Position)
Refer to Adjusting
the Tiller Angle on
Alignment
Pin
page 35.
Part No. 1125053