Specifications - NAD M22 Service Manual

OVERALL SPECIFICATIONS
Continuous output power into 8 ohms and 4 ohms
Rated THD (250 mW to rated power, CCIF IMD, DIM 100)
IHF dynamic power
Damping factor
Input sensitivity
Signal-to-noise ratio, A- weighted
Signal-to-noise ratio, A- weighted
Frequency response
Time to go to Standby mode at no input signal
POWER CONSUMPTION
Rated power
Standby power
Idle power
DIMENSION AND WEIGHT
Unit dimensions (W x H x D) *
Shipping weight
* - Gross dimension include feet, front panel and rear panel extensions (knobs, buttons, speaker terminals, sub fascia, etc.)
NAD SHALL NOT BE HELD LIABLE FOR ANY TECHNICAL OR USER INTERFACE DISCREPANCIES IN THIS MANUAL. THE M22 SERVICE MANUAL MAY BE SUBJECT TO CHANGE
WITHOUT PRIOR NOTICE. CHECK OUT WWW.NADELECTRONICS.COM FOR THE LATEST VERSION OF THE M22 SERVICE MANUAL.

SPECIFICATIONS

≥ 250 W (ref. rated THD, 20 Hz – 20 kHz, both channels driven)
≤0.005 % (ref. 20 Hz - 20 kHz)
8 ohms : 355 W
4 ohms :640 W
2 ohms : 620 W
>800 (ref. 8 ohms, 50 Hz and 1 kHz)
1.6 V (ref. rated power)
> 98 dB (ref. 1W)
> 120 dB (ref. rated power)
± 0.1 dB (ref. 20 Hz - 20 kHz)
- 2.5 dB at 3 Hz and 100 kHz
≤ 30 minutes
640 W (120V 60Hz, 230V 50Hz)
< 0.5 W
< 40 W
435 x 103 x 379 mm
17 1/8 x 4 1/16 x 14 15/16 inches
15.0 kg (33.1 lbs)
5