Dialing Settings; Other Settings - JabloCom BlueSynergy BTP -06L User Manual

4.4 Dialing settings

Please note that dialing settings are not available for BlueSynergy BTP-06B.
Ꮀ
Rules for numbers
Select Menu > Settings > Dialing > Rules for numbers to browse rules. Rules
define which line will be used to dial a number for particular phone number or
group of phone numbers.
Each rule contains a mask and a selected line. Mask is a string which describes
how a number should look like. When dialing a phone number, BlueSynergy com-
pares it with the mask. If it matches, BlueSynergy uses line defined in the rule to
dial the number.
The mask contains digits and wildcard characters ? or *(eg. 7?? or 555*).
Wildcard character ? represents one unspecified digit. If the mask is 12? then all of numbers 120, 121 or 125 will
match with the mask. If the mask is 7?? then all numbers starting with 7 and being three digits long will match
with the mask.
Wildcard character * represents group of digits with unspecified number of di-
gits. If the mask is 12* then all of numbers 123, 1246, 12345 or 12 will match with
the mask. If a mask is only * then all numbers will match with the mask.
Warning: You can use either ? or * in the mask, not both. * is only allowed to be
the most right character in the mask. Mask 1*2 is not allowed.
When there are more rules defined, BlueSynergy goes through them starting with the top one.
BlueSynergy removes country code (eg. +420) from dialed numbers before they are compared with the rules.
Thus you don't need to care if you have in your phonebook numbers with or without country code.
Ꮀ Rules for contacts
Use Menu > Settings > Dialing > Rules for contacts to choose preferred line for each type of contact number
(home / business / mobile). Choose Always ask, if you do not want to specify rule for particular type of contacts.
When dialing a number, BlueSynergy first checks Rules for numbers . If no match is found, then Rules for con-
tacts are applied.
Ꮀ
Country setting
Use Menu > Settings > Dialing > Country setting to configure your BlueSynergy for the landline network in
your country. Press LEFT or RIGHT ARROW to browse through countries or press first letter of your country to skip
directly to it.
Moreover appropriate country code is automatically selected (see Rules for numbers for details).
Ꮀ Outside line prefix
Use Menu > Settings > Dialing > Outside line prefix to configure the digits that have to be dialed to reach
an outside line. This is commonly used to insert an ‚0' or ‚1' before the phone number when dialed on a private
phone system, such as in a hotel or a place of business.
BlueSynergy will automatically add this prefix to all numbers longer than 6 digits. Please note that this prefix is
only used for landline calls.

4.5 Other settings

Use Menu > Settings > Phone to configure settings like date & time, current language or LCD parameters. Use
LCD settings dialogue to adjust contrast and backlight intensity of the LCD. Use UP and DOWN ARROW to select a
setting and LEFT and RIGHT ARROW to change value.
Use Menu > Settings > Sound to configure ring and message alerts, volume levels during a call and key tones.
Use Menu > Settings > Service to access special service functions. This menu allows you to get firmware and
hardware version, enter service code, reset all settings to factory defaults or change BlueSynergy's Bluetooth
name (which is shown in connected mobile phone).
BTP-06.L.ENG.MAN.User_manual.03
- 12 -