Warnings and Precautions Features of Model ML17 Specifications and Connections of Model ML17 Features of Model ML19 Specifications and Connections of Model ML19 Features of Model ML22 Specifications and Connections of Model ML22 Features of Model ML26 Specifications and Connections of Model ML26...
Warnings and Precautions Read all of the instructions before operating the set. Keep these instructions well for later use. PRODUCT All instructions must be followed during the operation. Do not cover or block the ventilation openings on the back cover. Do not use the sharp objects, the metal or the liquid to touch the signal plugs or push the object of this kind into the ventilation slots as it may cause short circuit and damage the unit.
Features of Model ML17 Slim Bezel Design Over Scan Selection Two Video Input/Loop Output Full Metal Shell Source Browse Function One S-Video Input Embedded 3D Y/C Separative Tech. Running State Display One VGA (PC) Input Auto Backlight System Specifications of Model ML17 Model ML17 Resolution...
Features of Model ML19 Slim Bezel Design Wide Voltage Design Two Video Input/Loop Output Full Metal Shell Over Scan Selection One S-Video Input Embedded 3D Y/C Separative Tech. Source Browse Function One VGA (PC) Input Auto Backlight System Running State Display...
Features of Model ML22 Slim Bezel Design Wide Voltage Design Two Video Input/Loop Output Full Metal Shell Over Scan Selection One S-Video Input Embedded 3D Y/C Separative Tech. Source Browse Function One VGA (PC) Input Auto Backlight System Running State Display Specifications of Model ML22 Model ML22...
Features of Model ML26 Slim Bezel Design Wide Voltage Design Two Video Input/Loop Output Full Metal Shell Over Scan Selection One S-Video Input Embedded 3D Y/C Separative Tech. Source Browse Function One VGA (PC) Input Auto Backlight System Running State Display Specifications of Model ML26 Model ML26...
Plug one end of the power cable to the power socket on the rear of the unit, and plug the other end to an appropriate outlet. Press the power switch (Model ML19, ML22 and ML26), then the unit goes to normal operation mode, and the power indicator lights up in green.
Menu Functions TYPE ITEM FUNCTION OPERATION RANGE APPLICABILITY Reduce the Press RIGHT/LEFT ALL INPUTS 3D NR noise level of to adjust OFF/LOW/MID/HIGH except VGA the picture NO SCAN Press RIGHT/LEFT ALL INPUTS except VGA OVER SCAN /90%/95%/100% to adjust /105%/110% ALL INPUTS except VGA H-POSITION 0-100...
Menu Functions TYPE ITEM FUNCTION OPERATION RANGE APPLICABILITY Adjusts the brightness of the BACKLIGHT 0-100 ALL INPUTS initiative backlight Automatically set the state of the brightness, LIGHT ON/OFF ALL INPUTS which varies along with the room lighting Restore user Displays "USER RESET" parameter to USER ALL INPUTS...
Troubleshooting Before contacting with the service personnel, consult the following troubleshooting list. SYMPTOM POSSIBLE CAUSES The power indicator doesn’t light up The power cord is not connected. The POWER button on the main unit is off. and the unit won’t turn on Brightness &...
Page 12
Maintenance 4. Timely and correctly cleaning the LCD screen in time Because of the dirty substances, e.g. dust, there will be some smudges on the surface of LCD screen, so please clean it in time and in a correct way. Usually drop the soft, non-fibre material e.g. absorbent cotton, lens tissue or glasses fabric, into some water to clean the screen.