Daikin VRV Reference Manual page 58

Featured Controllers (cont.)
DMS502B71 – Interface for use in BACnet
Interface for use in BACnet is a hardware gateway
solution that enables the BMS to monitor and control
the VRV indoor units through BACnet/IP protocol.
To resolve the challenges of integrating the VRV
systems, Daikin provides BMS Plug-ins to the
integrators for easy integration with the VRV system. BMS Plug-
ins are pre-programmed objects and graphics built for Niagara
AX specifically for Daikin VRV. By the use of free-of-cost BMS
®
Plug-ins, the integrators work load could be reduced to as little
as point linking.
DTA116A51 – DIII-Net/Modbus Communication Adaptor
The DIII-Net/Modbus Communication adaptor can be
used for Home automation system integration. With
the adaptor, up to 16 indoor units can be controlled
through Modbus/RTU.
DMS504C71 – Interface for use in LonWorks
Interface for use in LonWorks is a hardware gateway
solution that enables the BMS to monitor and
control the VRV indoor units through LonWorks
communication.
750-831 - WAGO BACnet/IP Controller
The WAGO BACnet/IP Controller is a programmable
controller that connects the WAGO I/O system
to the BACnet protocol. With the customizable
programming provide by the Daikin Controls team,
WAGO BACnet/IP controller can help fulfill most
project control requirements for Daikin and third-
party equipment control.
58
®
®