Pnp/Pci Configuration - Acer AcerPower APM6 Service Manual

PnP/PCI Configuration

Init Display First
Reset Configuration Data
Resources Controlled By
x IRQ Resources
Pci/VGA Palette Snoop
** PCI Express relative items **
Maximum Payload Size
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
Parameter
Init Display First
Reset Configuration Data
Resources Controlled By
43
Phoenix - Award BIOS CMOS Setup Utility
PNP/PCI Configurations
[PCIEx]
[Disabled]
[Auto(ESCD0]
Press Enter
[Disabled]
[4096]
F5:Previous Values F7:Optimized Defaults
Description
Initialize the AGP video display
before initializing any other
display device on the system.
Thus the AGP display becomes
the primary display.
Normally, you leave this field
Disabled. Select Enabled to
reset Extended System
Configuration Data (ESCD)
when you exit Setup if you have
installed a new add-on and the
system reconfiguration has
caused such a serious conflict
that the operating system
cannot boot.
This item allows user to assign
PnP resource (I/O address,
IRQ&DMA channels) for Plug
and Play compatible devices
automatically or manually.
Item Help
Menu Level
Options
Enabled
Disabled
Auto
Manual
Chapter 2