Ide Function Setup - Acer AcerPower APM6 Service Manual

IDE Function Setup

OnChip IDE Channel0
Primary Master
Primary Slave
Primary Master
Primary Slave
OnChip IDE Channel1
Secondary Master PIO
Secondary Slave
Secondary Master UDMA
Secondary Slave
IDE DMA Transfer Access
Serial-ATA 1
Serial-ATA 2
IDE Prefetch Mode
IDE HDD Block Mode
SATA PORT Speed Settings
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
All on-board peripherals can be set up through this menu.
Parameter
On-Chip IDE First/Second
Channel
IDE Primary/ Secondary Master/
Slave PIO
Chapter 2
Phoenix - Award BIOS CMOS Setup Utility
IDE Function Setup
[Enabled]
PIO [Auto]
PIO [Auto]
UDMA [Auto]
UDMA [Auto]
[Enabled]
[Auto]
PIO [Auto]
[Auto]
UDMA [Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
F5:Previous Values F7:Optimized Defaults
Description
The chipset contains a PCI IDE
interface with support for two IDE
channels. Select Enabled to
activate the first and/or second
IDE interface. Select Disabled to
deactivate an interface, if you
install a primary and/or secondary
add-in IDE interface.
The four IDE PIO (Programmed
Input/Output) fields let you set a
PIO mode (0-4) for each of the
four IDE devices that the onboard
IDE interface supports. Modes 0
through 4 provide successively
increased performance. In Auto
mode, the system automatically
determines the best mode for
each device.
Item Help
Menu Level
Options
Enabled
Disabled
36