Table A- 3: Horizontal And Acquisition System Specifications - Tektronix TDS5052 User Manual

TDS5000 Series User Manual

Table A- 3: Horizontal and acquisition system specifications

Characteristic
Acquisition modes
Acquisition rate
Minimum record length
Maximum record length
Standard
Option 1M installed
Option 2M installed
Real-time sample rate range
Equivalent-time sample rate or
interpolated waveform rate range
Seconds/division range
Maximum FastFrame update rate,
nominal
Horizontal delay range
Long term sample rate and delay
time accuracy
RMS aperture uncertainty, typical
Appendix A: Specifications
Description
Sample, Peak detect, Hi Res, Average, and Envelope
Up to 100,000 waveforms per second in Fast Acquisition
mode
Up to 130 waveforms per second with Fast Acquisition off
500 points
Depends on the number of active channels and the
amount of memory installed
100,000 points (3 or 4 channels)
200,000 points (2 channels)
400,000 points (1 channel)
500,000 points (3 or 4 channels)
1,000,000 points (2 channels)
2,000,000 points (1 channel)
2,000,000 points (3 or 4 channels)
4,000,000 points (2 channels)
8,000,000 points (1 channel)
Number of channels ac-
quired
1
2
3 or 4
2.5 GS/s to 250 GS/s
Equivalent-time acquisition can be enabled or disabled.
When disabled, waveforms are interpolated at the fastest
time base settings.
200 ps/div to 40 s/div
225,000 frames per second
16 ns to 250 s
±15 ppm over any ≥ 1 ms interval
≤ [3 ps + (0.1 ppm × record duration)]
Sample rate range
1.25 S/s to 5 GS/s
1.25 S/s to 2.5 GS/s
1.25 S/s to 1.25 GS/s
A- 11