Advertisement
Setup the RM 5400
2
1
1.
Connect the two antennas to ANT1 and ANT 2
2.
Connect the Power Supply and turn the power on.
3.
Wait for a couple of minutes till front panel lights are stabilized
4.
Setup the RM 5400 Modem where you can get at least 2 Signal Strength lights are lit
5.
Move around up to 25 feet from the Router if necessary to get 2 signals.
6.
Secure the RM 5400 modem to any permanent fixture
7
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
1
3
Advertisement
