Table of Contents
Advertisement
MM-4320-DVR
4.3" Factory Mount Mirror Monitor
with Built-In DVR
Operating Instructions
Motion Event Record
Sound Record
Mic Sensitivity
Scene
Exposure
White Balance
ISO Sensitivity
Still Capture:
Still Image Size
Still Quality
Scene
Exposure
White Balance
ISO Sensitivity
Color
Effect
Playback Menu:
Volume – Adjust the playback volume through the internal speaker.
Delete – Allows you to delete one or all of the files (protected files cannot be deleted).
Protect – This allows you to protect any files not currently protected.
Media Tool:
Format SD Card – This will format the contents of the currently inserted card
(Warning: this will delete all contents).
SD Card Info – This shows information about the currently inserted card.
(continued)
This sets the recording length when a motion event is
detected (requires the unit to be powered constantly).
This turns the built-in microphone recording on or off.
Adjust the sensitivity of the built-in mic.
Set different scene modes to improve picture quality in
different scenarios.
Change the exposure value of the camera.
Change the white balance of the camera.
Change the ISO setting of the camera.
This sets the size of the picture when taking still
images. Lower resolution will allow for more pictures
to be stored on the card.
This adjusts the image quality for still images
(lower quality offers more storage).
This adjusts the camera settings to compensate for
different environments.
Adjust the exposure level of the camera.
Adjust the white balance of the camera.
Adjust the ISO setting of the camera.
Adjust the color setting of the camera.
Apply certain graphical effects to the still images.
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - technical.eu@aampglobal.com (Europe)
Installation Guide
email - support@aampglobal.com (US)
5
Advertisement
Table of Contents
