7.3. Setup Menu
In the setup menu the basic settings of your camera can be set.
1. Press the button Menu [9] in the photo mode [
settings menu.
2. Select the Setup menu [
3. In the Setup menu [
shutter button to enter the submenu.
4. Select the desired option with the / buttons and press the shutter button to confirm
the selection.
5. Press the button Menu [9] to exit the menu.
To exit a submenu without making a change, press the button9.
In the following the factory setting values are highlighted with a "star" [*].
Sounds
Here you can specify whether the camera should sound a tone when it is switched on and each
time you press a button.
Off/ On*
Light Frequency
The camera supports the lighting frequencies of 50 Hz and 60 Hz. When photographing under
fluorescent lighting, select the correct frequency setting, according to the voltage used in your
local area. This feature will only be active if you set "Fluorescent" in the white balance menu.
50Hz*/ 60Hz
AFTER SALES SUPPORT
1800 623 432
AUS
] by pressing the button .
] select the desired option with the / buttons and press the
MODEL: Fun
PRODUCT CODE: 91835
] or video mode [
] to access the
10/2014
21
Need help?
Do you have a question about the FUN and is the answer not in the manual?
Questions and answers