Download The App - Bluesound Powernode N150 Owner's Manual

INTRODUCTION
GETTING STARTED
5. Enter your home network's Wireless Password (Passphrase, WEP/WAP key as applicable) in the field "Enter
password or key (if protected)".
The Password (Passphrase, WEP/WAP key as applicable) is the same Password that was setup or generated during
the configuration of your home router or gateway. An incorrect password entered in the "Configure wireless
menu" screen will simply cause the unit to timeout and return to Hotspot Mode.
Trying multiple passwords will not damage the device in any way. If you are not sure what is your Password, login
to your router and locate the Password in the applicable setup screen for Wireless Configuration section. Refer to
your router's documentation for further information.
6. Select a "Node name" from the drop down list or use the on-screen keyboard to create a customized room name in
the field "Custom name".
7. Select "Update" and wait for the POWERNODE N150's LED INDICATOR/MUTE button to turn solid blue. With the
LED INDICATOR/MUTE button turning solid blue, your POWERNODE N150 is now connected with your home
network and ready to be used with the Bluesound App.
Alternatively, the POWERNODE N150 can be connected directly to your Wired home network or router using the
Ethernet cable provided.

DOWNLOAD THE APP

Using your iPad (not provided), download from the iTunes App Store the free Bluesound controller App
CONNECT TO MUSIC
You're ready to stream Internet Radio!
• • • • Go to the Music Sources menu by tapping the Home menu icon
• • • •
Launch and select your favorite radio station from anywhere on the planet. Live!
To play music stored on a computer or NAS device,
• • • • Select the Settings icon (
• • • •
Choose "Configure player" from the pop-up menu, and then "Configure network shares".
• • • •
Follow the screen prompts, and open your whole home to the pleasure of streaming HiFi music.
) on the upper right corner of the iPad display.
.
.
9