Bluesound Powernode N150 Owner's Manual page 17

OPERATION
USING iPad AS POWERNODE N150 CONTROLLER
THE iPad AS POWERNODE N150 CONTROLLER
The POWERNODE N150 can be controlled using your iPad. Visit the iTunes App Store and download the free Bluesound
controller App. Selecting the Bluesound App opens the Bluesound Control Panel.
CONFIGURING YOUR BLUESOUND SYSTEM
If you have multiple Bluesound devices in the
same network, you can control them separately.
Each Bluesound device on your network is an
independent device working in conjunction with
your Bluesound system.
As a complete music system, they for the most
part work together. Rarely does each device need
to be configured individually as playlists, music
sources and cloud subscriptions are replicated to
each device when configured. Playback however
is controlled individually or in groups.
From a multiple Bluesound device setup, select
the device to playback using the following steps.
h h h h
Press the top of the playlist
down list of available devices appear. Select
the device on your network you wish to
control with your iPad.
h h h h
The selected device will be highlighted as
"Master".
h h h h With the "Master" device selected, other
devices in the same network will be labeled
"Add", "Remove" or "Slave". Tap repeatedly to
switch among the options.
Add: Device is added in the same group
of devices.
Slave: Follows whatever is in broadcast
or being played back by the Master
device.
Remove: Device is removed from the
group of devices. The removed device
will now only be a stand alone device.
Press "Slave" for the removed device to
be returned back in the list of devices.
Tap "Remove" box in the previously
removed device and the box will change
to "Add" thereby rejoining said device
with the same group.
and a drop
17