Operation - Bluesound Powernode N150 Owner's Manual

OPERATION

SETTING UP YOUR POWERNODE N150
SETTINGS
Tapping ( ) launches the "Settings" section of the POWERNODE N150 allowing you to customize its default
settings. The following are the parameters you can setup or initiate.
• • • • Add mode – At "ON" setting, an added song will be
placed at the end (last) of the current playlist.
At "OFF" setting, a song to be added will be inserted
right after the current song being played back or
above the "line" – the marker where songs can be
added while at "OFF" setting.
• • • •
Reindex music collection - Whenever songs are
added to your library, reindex your Bluesound device
so that it can properly locate and identify these new
songs.
How long will it take to reindex your Music Library? It
will depend upon its size and network connection
(wired or wireless). For wireless connection, it is 500
songs per minute; for wired connection, 1000 songs
per minute.
During the indexing, "Indexing phase x – xxx tracks
processed" is displayed. "Reindex music collection" will
re-appear once the indexing is completed.
• • • • Reload artwork – Activate "Reload artwork" if some of
your Albums' artwork went missing after re-indexing.
• • • • All songs random – Re-arrange in random order all
songs in your Library and then start or continue
playback. Tap again "All songs random" to randomly
re-arrange once more your songs.
At random mode, "Shuffle" in the playlist is
highlighted. Tap "Shuffle" to exit random play and
resume normal playback.
• • • • i0S App: x.x.x Node: x.x.x
List the iOS App version and Node software release
version of your POWERNODE N150.
13