Table of Contents
Advertisement
Figure 32: Patient Instruction print-out
•
Enable, Disable and Copy Program(s)
-
Use the Programs menu to enable and disable different programs.
The Main program represents the primary program and cannot be
removed.
-
The default program settings are 1.) Main, 2.) Music, 3.) Restaurant,
4.) Car. Except for Main, programs can be changed or disabled.
-
Pre-defined program types are available and include: Main, Music,
Restaurant, Car, Quiet, Noise, Party, Outside, TV and Streaming
(functionality coming soon).
-
Selecting "Disabled" will disable that program slot.
-
Programs can be swapped and copied from one to another using the
Copy Program(s) menu featured in the Tuning tab (Figure 33).
NOTE- Duplicate programs cannot be programed to the Processors. A pop-up alert will appear if
a duplicate program is selected.
•
Match to ELF Rx: Resets the fitting response back to ELF calculated targets (ELF Rx). In the Fitting
screen under the Tuning tab, click "Match to ELF Rx." If "Link Programs" is enabled, all programs will
be reset to ELF Rx; if "Link Programs" is disabled, only the active program will be reset to ELF Rx.
•
Apply Feedback Limits: When engaged, it limits the prescribed gain to a value less than the
measured maximum gain before feedback for both, left, right or neither. After Measuring Feedback, if
feedback potential is detected, feedback limits will automatically be applied.
Figure 33: Copy Programs
IFU00022vJ
23
Advertisement
Table of Contents
