Table of Contents
Advertisement
8. INSTALLATION
8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Model .......................................
PNC .........................................
Serial number ...........................
8.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in units
and work surfaces that align to the
standards.
8.3 Connection cable
• For a single phase or two phase
connection use the following (or higher)
mains cable type: H05BB-F Tmax
90°C.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05BB-F Tmax 90°C.
Speak to your local Service Centre.
8.4 Building In
min. 55 mm
WARNING!
Refer to Safety chapters.
min. 100 mm
min. 650 mm
30 mm
A) supplied seal
B) supplied brackets
550 mm
B
CAUTION!
Install the appliance only on a
worktop with flat surface.
ENGLISH
9
A
Advertisement
Table of Contents
