Installation Instructions - Danby DUF206E1WDD Owner's Use And Care Manual

Installation Instructions

LOCATION
Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Avoid placing the appliance in a narrow recess or near any heat
source, direct sunlight, or moisture. Let air circulate freely around the appliance. Keep the rear of the
appliance 10.6 cm (4 inches) away from the wall, ensure there is 20.3 cm (8 inches) of clearance
between each side and the surrounding walls and ensure there is 30.5 cm (12 inches) of clearance
between the top of the appliance and any cabinets or ceilings. This will allow proper air circulation.
1. Locate the appliance in a location where extension cords are not necessary.
2. Select a location with consistent year round temperatures. It is not recommended to operate
the appliance when surrounding air temperature is below 5°C (41°F), though it will not harm the
appliance to stand in any temperature below 5°C (41°F), provided the temperature control is set
to avoid running the appliance. In order to keep operating cost down, do not place the appliance
near a stove, furnace, heat register or in direct sunlight. Avoid placing the appliance in a damp or
moist area, such as basements.
FEATURES
1. Outlet Airfl ow Gap
2. Glass Shelves
3. Inlet Airfl ow Gap
4. Plastic Drawer
5. Lamp Switch
6. Door Tray
4