Installation Instructions; Features - Danby DCRM85WDB Owner's Use And Care Manual

Compact refrigerator
Table of Contents

Advertisement

Available languages

Available languages

Installation Instructions

LOCATION
DOOR REVERSAL
INSTRUCTIONS
CAUTION
To avoid personal injury to yourself
and/or property, we recommend
someone assist you during the door
reversal process.
• Ensure the appliance is unplugged and empty.
• Adjust the 2 leveling feet to their highest position.
Tools Required
Cross -bladed screw driver - Phillips head
*NOTE:
- To take the door off it is necessary to tilt the
appliance backward.
- You should rest the appliance on something solid
e.g a chair just below the top panel.
DO NOT lay the appliance completely flat as this
may damage the coolant system.

Features

1) THERMOSTAT DIAL: For controlling the temperature
inside the refrigerator; the compressor activates as
soon as the temperature rises above the desired level.
2) FREEZER COMPARTMENT WITH FREEZER DOOR:
Separate freezer section can hold small items.
3) WIRE SHELF
4) DRIP TRAY: Catches the water that drips off the
evaporator when defrosting.
5) MAGNETIC GASKET: Tight fitting door seal keeps all
the cooling power locked inside. No hooks or latches.
6) BOTTLE RACKS: For tall, small and medium cans or
jars.
7) CANSTOR Door Liner: Holds 355mL cans of pop,
juice, or beer.
8) Leveling legs - Adjust so the unit is leveled on the
surface.
Remove exterior and interior packaging, wipe the outside thoroughly with a
soft dry cloth and the inside with a wet, lukewarm cloth. Avoid placing the
unit in a narrow recess or near any heat source, direct sunlight, or moisture.
Let air circulate freely around the unit. Keep the rear of the refrigerator 5
inches away from the wall.
Do not tilt the refrigerator more than 45° from the upright position
during movement.
1) Select a place with a level floor.
2) Allow 5 inches of space between the back of the refrigerator and any
adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic
coating. Heat sources nearby will cause higher electricity consumption.
4) Avoid damp places. Too much moisture in the air will cause frost to form
very quickly on the evaporator and your refrigerator will have to be
defrosted more frequently.
If you find the direction of opening the door on your appliance
inconvenient, you can change it by following the diagram below.
St ep 1
St ep 3
2
4
7
3
8
4
St ep 2
St ep 4
1
5
6

Advertisement

Table of Contents
loading

Table of Contents