AudioCodes Mediant E-SBC
To connect the device to the power supply:
1.
Connect the line socket of the AC power cord (supplied) to the device's AC power
socket (labeled 100-240V 1.5A ~50-60 Hz), located on the rear panel.
2.
Connect the plug at the other end of the AC power cord to a standard electrical outlet.
After cabling and powering up, the POWER LED on the front panel lights up green.
BroadCloud SIP Trunk
Figure 2-16: Connecting to the Power Supply
17
2. Installing the Hardware
AudioCodes Mediant E-SBC