Installation Procedures - HP XP1024 Operating System Configuration Manual

Installation procedures

18
Perform these actions to install and configure the disk array:
1. Install and configure the disk array
• Setting the host mode for the disk array ports
• Setting the System Option Modes
• Configuring the Fibre Channel ports
2. Install the host hardware
• Installing the host system
• Installing and configuring the HBAs
• Fabric zoning and LUN security
• Multiple operating systems in a shared switch fabric
3. Connect the disk array
• Determining the paths
• Storage capacity per path
4. Load the OS software
5. Configure the disk array devices in MPE/iX
• Configuring with native Fibre Channel disk array attachment
• Configuring with SCSI-FC fabric router disk array attachment
6. Create volume sets and volumes
HP StorageWorks Disk Array XP Operating System Configuration Guide: MPE/iX
(see page 19)
(see page 24)
(see page 27)
(see page 30)
(see page 39)
(see page 31)