Mp3/Wma/Jpeg Cd Operation; Customizing The Function Settings - Toshiba SD-P4000 Service Manual

Advanced playback

MP3/WMA/JPEG CD operation

This unit can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW.
To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding
Software (not supplied).
The Apple-HFS-System cannot be played.
MP3/WMA/JPEG CD information
CD
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits exten-
sion letters, "mp3", "wma", "jpg".
• MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
• This unit can read 200 files per disc. If one directory has more than 200 files, it reads up to 200 files, the
remaining files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc.
• MP3/WMA/JPEG CDs cannot be used for the purpose of recording.
• If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by "Joliet Recording Specification" can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by "Hierarchical File System" (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Name each file including two-digit or three-digit number (ex. "01" "02" or "001" "002").
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
• The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
40
Advanced playback
MP3/WMA/JPEG CD operation (continued)
You can select your desired JPEG file on the file menu and picture menu.
The selected JPEG file is automatically adjusted to the TV screen. (When the
aspect ratio of the JPEG file is different to your TV screen, the black bar will
appear at the top and bottom, or the both sides of the TV screen.
JPEG CD playback
CD
1 Load a disc on which JPEG files have been
recorded in the slot.
2 A file menu screen will appear on the screen.
Press / to select folder.
CD-R -/36
Collection
1 Pic-1 8 Pic-8
2 Pic-2 9 Pic-9
3 10
Pic-3 Pic-10
4 11
Pic-4 Pic-11
5 Pic-5 12 Pic-12
6 Pic-6 13 Pic-13
7 14
Pic-7 Pic-14
/0-9/Enter/Play Mode/DVD Menu
3 Press / / / or Number buttons (0–9) to
select the desired file.
To display a picture menu, press DVD MENU.
(To return to a file menu, press TOP MENU.)
Press / or / to select the desired file.
• To display next list, press SKIP / .
• When PLAY has been pressed after displaying
the file menu, playback begins automatically
starting from the first file. In this case, if the first
file is a JPEG file, the first JPEG file is played
back. If the first file is an MP3/WMA file, only
MP3/WMA files are played back in order.
4 Press ENTER. The selected picture appears
on the screen.
Rotating an image
You can rotate an image by 90 degrees by press-
ing ANGLE during playback of the image.
" ", " ", " " or " " appears
briefly on the screen.
5
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
42
0–9
TOP MENU
DVD MENU
/ / /
ENTER
PLAY
STOP
SKIP 4/¢
ANGLE
PAUSE
Slide show playback
CD
The slide show enables you to view pictures (files) one after
another automatically.
Preparation:
• Set "JPEG Interval" setting to "5 Seconds", "10 Seconds"
or "15 Seconds" .
44
1
Select your desired starting file for the slide
show in the step 3 as left.
2 Press ENTER to start slide show from the
selected file.
• If you press PAUSE during the slide show, the slide
show stops temporary. " 8 " appears briefly on the
picture.
If the picture appears upside down or sideways,
press ANGLE repeatedly until it's right side up.
" ", " ", " " or " " appears briefly
on the screen.
Press PLAY or SKIP again to resume the slide
show.
• When the slide show playback finished the file list
appears.
• To stop the slide show, press STOP. The file list ap-
pears.
MP3/WMA CD playback
CD
1 Load a disc on which MP3 or WMA files have
been recorded in the disc slot.
2 A file menu screen will appear on the screen.
Press / or ENTER to select folder.
-/72 --:--
CD-R
Pops
1 Japan 8 flower
2 9
Bay Bridge Lies and Truth-
3 CLOSE MY EYES 10 winter fall
4 DIVE TO BLUE 11 Rain
5 12
Honey Strawberry
6 BLUE EYES 13 Welcome party
7 14
Blurry Eyes Thailand
/0-9/Enter/Play Mode
3
Press / / / or Number buttons (0–9) to
select the desired file.
• In case the folder includes more than 15 files, press
or to display next file list.
-/72 --:-- -/72 --:--
CD-R CD-R
Pops Pops
1 8
Japan flower 15 Mother
2 Bay Bridge 9 Lies and Truth-
16 Hold Your Last
3 CLOSE MY EYES 10 winter fall
4 11
DIVE TO BLUE Rain
5 Honey 12 Strawberry
6 13
BLUE EYES Welcome party
7
Blurry Eyes 14 Thailand
/0-9/Enter/Play Mode /0-9/Enter/Play Mode /0-9/Enter/Play Mode
• When PLAY has been pressed after displaying the
file menu, playback begins automatically starting
from the first file. In this case, if the first file is an
MP3/WMA file, only MP3/WMA files are played back
in order. If the first file is a JPEG file, the first JPEG
file is played back.
4
Press ENTER.
The selected file starts playing back.
Function setup

Customizing the function settings

You can change the default settings to customize performance to your
preference.
DVD
Setting procedure
VCD
CD
1
Press SETUP during stop mode.
The following on-screen display
appears.
Language Picture Sound Parental Other
/Enter/Setup/Return
2 Press or to select the desired section, then
press or ENTER.
Section
Option Details
Menu To select the language of "Menu", "Subtitle" and "Audio" if
Language
Subtitle their languages are recorded onto the disc more than one
Audio language.
Tv Screen To select a picture size according to the aspect ratio of your TV.
Display To turn on or de-activate the operational status display on the
screen.
Picture
JPEG Interval To select a preferred setting for the slide show playback.
Select Files To select your desired file type for playing back a containing a
mixture of MP3, WMA, JPEG files.
Sound DRC To select On or Off for DRC (Dynamic Range Control).
Password Input 4-digit password to set the parental level.
Parental
Parental To select a preferred parental level for the parental setting.
Other OSD Language To select a preferred language for on screen display.
0–9
TOP MENU
/ / /
ENTER
PLAY
STOP
5
Press STOP to end playback.
• The unit records the stopped point. " " appears on
the screen. Press PLAY to resume playback (from
the scene point).
• If you press STOP again or unload the disc, the unit
will clear the stopped point.
About file menu
Operation Elapsed time
Media type File number
Folder
/0–9/Enter/Play Mode/DVD Menu
: Indicates MP3 file
: Indicates WMA file
: Indicates JPEG file
Notes:
• The picture menu is displayed when the FUJICOLOR CD
or the Kodak Picture CD are played. To display the file
menu, press TOP MENU.
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• MP3 or WMA file on the Kodak Picture CD is not recog-
nized on this unit.
Notes:
• During MP3/WMA/JPEG playback, you cannot use JUMP, A-
B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG CD playback (see
pages 35 and 36).
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
SETUP
/ / /
ENTER
RETURN
3 Press or to select the desired option.
4 Change the selection using / / / or ENTER,
by referring to the corresponding pages 44 and
45.
• Repeat step 3 and 4 to
change other settings.
• Press to select another
operation, go back to step 2.
5
To make SETUP screen disappear, press
SETUP or RETURN.
Page
44
44
44
44
44
45
45
45
41
43