Download Print this page

SAFERA Connection Hub User Manual

For safera siro in-line and siro r

Download this manual

User manual

Safera Connection Hub for Safera Siro IN-line and Siro R

20863_01-A

Need help?

Do you have a question about the Connection Hub and is the answer not in the manual?

Page 1 User manual Safera Connection Hub for Safera Siro IN-line and Siro R 20863_01-A...
Page 2: Electrical Specifications
2. Container Unit (CTU) connection for the optional liquid extinguishing system. This applies only to systems fitted with the necessary tubing and nozzles (Safera Power IN Siro IN-Line).
Page 3 In this case the home automation system’s logic input is pulled to ground potential Connection Hub shall be installed between the Safera Sensor Unit and Power Supply. when the AUX-output signal is active. Note that the maximum current pass in the...
Page 4 3. AUX-connection to an Automation or 4. Installation and testing with Safera Siro Security System and Siro R The AUX signals can be interpreted in many ways: 1. Connect all cables according to the pictures. 1. Simple ON/OFF information for any type of alarm (heat, fire or water leak). This 2.
Page 5 5. Removing the Connection Hub or CTU from a Safera System Connection Hub and CTU cannot be removed by normal means. The system’s oper- ating principle is that once they are installed, their removal will always raise an error event. In a special case where removal is necessary, contact local Safera Support for...