Replacing The Hhln4125 Side Connector Board - Motorola HHLN4125 User Manual

REPLACING THE HHLN4125 SIDE CONNECTOR
BOARD
Disassembling the RBA before the one (1) year
limited warranty has expired will void the warranty.
Disassembling the Side Connector Board
1. Detach the RBA from the radio.
2. Remove the two screws in
the housing/button assem-
bly using a T6 Torx® driver.
3. Gently pull the rubber gas-
ket from the housing/button
assembly.
4. Lift the cover flap of the
15-pin connector and dis-
connect the flex connector
from the board.
5. Repeat Steps 1 through 3 to disassemble the
replacement side connector.
Reassembling the Side Connector Board
1. Lift the cover flap of the 15-pin connector and
connect the RBA flex connector to the board
removed from the replacement side connec-
tor.
18
Screws