Avaya AP100 Configuration Manual page 9

Meru Networks WLAN Controllers with AP100, AP201, AP208
AP configuration
Short preamble should be turned off per AP for wireless IP telephones. Under configuration of
interface Dot11Radio this should be disabled.
Interface Dot11Radio <ap-id> <ap-idx>
no preamble-short
A
An AP boot-script for AP configuration is required to support the SVP solution.
Create a file, svpconfig.scr, containing the following lines, and copy this to the controller into
the directory /opt/meru/ATS/scripts/.
For Release 3.1.x and older, use the following settings in svpconfig.scr:
qos if wmac0 set qos_scheduling_discipline 1
qos if wmac0 set mav 0
wmac tx_rate decrease 2
if 1 set be1_queue_len 48
vayu queuepackets wmac1 4
vayu queuedspackets wmac0 4
For Release 3.2 and higher, use the following settings in svpconfig.scr:
qos if wmac0 set qos_scheduling_discipline 1
qos if wmac0 set mav 0
Then configure the boot-script for each access point.
ap 1
boot-script svpconfig
References
Meru Networks Configuration Reference, available at
Configuration Guide
http://ftp.merunetworks.com/
Field Verified
Page 9