Internal Diagnostic Leds - Cisco SNS 3415 Installation Manual

Internal Diagnostic LEDs

LED Name
Identification
Internal Diagnostic LEDs
The server has internal fault LEDs for fan modules and DIMMs. The LED lights amber to indicate a failed
component.
Power must be connected to the server for these LEDs to be operational.
Note
The following figure shows the locations of these internal LEDs in Cisco SNS-3415 or Cisco SNS-3495
appliance.
The following table describes the callouts in the above figure.
1
Cisco SNS-3400 Series Appliance Hardware Installation Guide
8
Fan module fault LEDs (one next to each
fan connector on the motherboard)
Cisco SNS 3400 Series Appliance Overview
State
• Off—The Identification LED is not in use.
• Blue—The Identification LED is activated.
2 DIMM fault LEDs (one next to each
DIMM socket on the motherboard)