Cleaning And Maintenance - Havso Carolina 1.1 Instructions Manual

Cleaning and maintenance

Important information when deciding where to put your heater and
when using it
• Remember that the infrared heater will get very hot when it is on,
including the top and back of the heater. You should therefore make
sure that it is a safe distance, a minimum 10 cm from other objects.
• Hang the infrared heater in a safe location. Make sure it is high up,
somewhere where no-one can walk into it, and where it is out of the
reach of children.
• The infrared heater must be at least 10 cm away from other objects,
as the heat can damage or discolor fabric or other objects nearby.
• Remember to always switch off your infrared heater when it is not in
use (pull the cord of the main switch). Pull out the plug and make sure
the infrared heater has cooled down before leaving it unsupervised.
Cleaning and storage
• You need to clean the infrared heater regularly and before you store it
away.
• Switch off the infrared heater by pulling the cord (main switch) and
then pull the plug out of the electric socket. Allow it to cool before
cleaning and storing it.
• Use a dry cloth to clean the casing. Do not use water, wax, polish or
other cleaning agents.
• Store the infrared heater in a dry and well ventilated place.
16