How To Use - Havso Carolina 1.1 Instructions Manual

How to Use

This infrared heater is intended for outdoor use. The universal bracket
enables you to put the infrared heater in, for example, a pavilion, awning
or party tent. You can attach the infrared heater to tubes or beams up to a
maximum of 4 cm. Choose the universal bracket depending on where you
want to put the heater. You need to put the infrared heater at least 10 cm
away from other objects. Note that the back and top of the infrared heater
will also get hot.
Suggestions on where to
put your infrared heater
Party tents and gazebos:
• When you put your infrared heater in a party tent, you have to make
sure that it is not directly against the edge of the party tent's canopy.
The infrared heater should either hang down under the edge of the
party tent's canopy, or you can angle the infrared heater at a distance
of at least 10 cm from the edge of the party tent's canopy using the
universal bracket. Make sure that you tighten the wing screws securely
in the universal bracket to ensure that the infrared heater is stable. See
figure 5.
14
Warning! When deciding
where to put your infrared
heater, make sure there is
plenty of space for the
thermal radiation area.