Changing Camera Modes - GoPro Wi-Fi Remote User Manual & Warranty

USING YOUR WI FI REMOTE WITH
MULTIPLE CAMERAS
USING REMOTE MODES WITH A HD HERO OR WITH
MULTIPLE CAMERAS
When the Wi-Fi Remote is connected to a single HD HERO
camera or to multiple cameras, it does not mirror the
controls of a single camera. Instead, use Remote Modes to
control the Wi-Fi Remote and connected camera(s).
Press to advance through the Wi-Fi Remote's modes in
the following order:
Default
Status
Remote
Camera
Mode
Battery
Level
10
1 WiFi Remote UM ENG.indd 10-11
Displays the number of
cameras currently connected
and the MULTI mode icon.
[fact check]
Change the Camera Modes
of connected cameras. See
CHANGING CAMERA
MODES below. This screen will
not appear if no cameras are
connected.
Displays the Wi-Fi Remote
battery's remaining charge.
Connection
Firmware
Update

CHANGING CAMERA MODES

When the Wi-Fi Remote is connected to a single HD HERO
or to multiple cameras, use REMOTE CAMERA MODE to
change the camera mode of each connected camera:
1. Press on the Wi-Fi Remote to cycle through mode
screens until REMOTE MODE screen appears.
2. Press to select REMOTE MODE.
3. Press to cycle through camera modes.
4. Press to select the mode.
5. All cameras will now be set to the selected photo or
video mode.
Manually start polling for new
connections. See MANUALLY
CONNECTING ADDITIONAL
CAMERAS below.
Update the Wi-Fi Remote
firmware. See FIRMWARE
UPDATES above.
11
12/15/11 7:17 PM