Wi-Fi remote: Battery + Charging We recommend charging your Wi-Fi Remote for one hour before using it the first time, however no damage will occur if you don’t. To charge the Wi-Fi Remote, connect it to a computer or USB power supply with the included USB cable. The LCD screen displays the Wi-Fi Remote’s battery level while the Wi-Fi Remote is powering ON or charging.
Wi-Fi remote: Camera Controls The Wi-Fi Remote gives you remote access to all your GoPro camera settings, power ON/OFF and start/stop recording. Control up to 50 cameras at a time from up to 600’/180m in optimal conditions. Different information will be displayed on your LCD screen if you are connected to more than one camera at a time.
Wi-Fi remote: Ways to Wear The Attachment Key makes it easy to attach the Wi-Fi Remote to your car keys, lanyards, straps, zippers and more. To insert the Attachment Key: Insert the Attachment Key into the key slot until it clicks. To remove the Attachment Key: Slide and hold the latch lever in the direction of the arrow, then remove the key.
Page 6
Wi-Fi remote: Ways to Wear The Attachment Strap (Optional Accessory) attaches to your wrist, backpack straps, poles, bike frames and more. To attach the Wi-Fi Remote to the Attachment Strap: 1. Thread the Attachment Strap through the slots on the bottom of your Wi-Fi Remote.
Page 7
Connecting Connect your Wi-Fi remote to your GoPro camera for complete camera control. CONNECT TO: • HerO3 • HD HerO2 • Original HD HerO...
Connecting: GoPro Cameras + Remote You can connect your Wi-Fi Remote to any Wi-Fi-enabled GoPro camera by following the instructions listed below. To connect HERO3 + Wi-Fi Remote: 1. Power ON your Hero3: a. Press to cycle through to b. Press to enter.
Connecting: GoPro Cameras + Remote To connect HD HERO2 + Wi-Fi Remote: 1. Put your camera into Connection Mode: a. Make sure your Wi-Fi BacPac is attached to your HD HERO2 camera and both are powered ON. b. Press POWER/MODE button on the Wi-Fi BacPac to enter the camera’s Wi-Fi...
Page 10
Otherwise, select NO. 5. If connection was not successful, you will see the following screen. Please repeat the steps above. The Wi-Fi Remote can control up to 50 GoPro cameras at a time from up to 600ft / 180m away. TIP:...
Connecting: GoPro Cameras + Remote To connect the Original HD HERO + Wi-Fi Remote: To connect the Original HD HERO + Wi-Fi Remote: 1. Place both your Original HD HERO and Wi-Fi 1. Place both your Original HD HERO and Wi-Fi...
Page 12
4. After, you will be asked if you would like to connect to another GoPro camera. To pair with additional to select YES, then repeat Step 1 cameras, press above. Otherwise, select NO.
Safety Information WARNING: Failure to follow these safety instructions could result in fire, electric shock or other injury or damage to the Wi-Fi Remote or other property. HANDLING The Wi-Fi Remote contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint or insert foreign objects into the product.
Safety Information WATER RESISTANCE Do not submerge the Wi-Fi Remote in more than 10ft / 3m of water. Damage to the Wi-Fi Remote caused by excessive water pressure is not covered under warranty. USING CONNECTORS AND PORTS Never force a connector into a port. Check for obstructions on the port.
Page 15
Safety Information KEEPING THE WI-FI REMOTE WITHIN ACCEPTABLE TEMPERATURES The Wi-Fi Remote is designed to be operated in temperatures between 0° C and 40° C and stored in temperatures between 0° C and 70° C. Extreme temperatures may temporarily affect battery life or affect the functionality of the Wi-Fi Remote.
Page 16
Learn about more GoPro products at: gopro.com. Please recycle. 130-00430-000 reVa...
Need help?
Do you have a question about the Wi-Fi Remote and is the answer not in the manual?
Questions and answers