Powering On/Off - GoPro Wi-Fi Remote User Manual & Warranty

Hide thumbs Also See for Wi-Fi Remote:
Table of Contents

Advertisement

USING YOUR WI FI REMOTE

POWERING ON/OFF

When the Wi-Fi Remote is OFF or in power-saving mode,
press
to power ON.
Powering OFF the Wi-Fi Remote will also power OFF
the connected cameras. The Wi-Fi BacPacs will remain
powered ON so that you can quickly reconnect the Wi-Fi
Remote when you power ON again.
1. With the remote ON or in power-saving mode, press
and hold
for three seconds.
2. All connected cameras will power OFF. Their Wi-Fi
BacPacs will remain powered ON.
3. The Wi-Fi Remote will then power OFF as well.
BATTERY LEVEL AND CHARGING
It is recommended that you charge your Wi-Fi Remote
for two hours before first use. You can check the Wi-Fi
Remote's battery level on the BATTERY STATUS screen.
See SELECTING REMOTE MODES below for
instructions.
To charge the Wi-Fi Remote, connect it to a computer or
USB power supply with the included USB cable.
6
1 WiFi Remote UM ENG.indd 6-7
REMOTE LED RECORDING LIGHT
When connected to a single HD HERO2 or later camera, the
Remote LED Recording Light will flash the same patterns
as the camera.
Remote
Comments/Questions
State
Starting Up
Make duration same as
x 3
Capturing
Continuous, 1 flash/sec while capture
is occuring, as on the HD2. If multiple
cameras are controlled by the remote,
the LED continues to flash as long as
at least one camera is capturing. If
cameras are capturing in multimode,
the LED flash is based on the the most
continuous mode in operation; for
example, if one camera is shooting
video, the flash reflects the video
capture. The order of modes from
most continuous to least continuous
is: video, time lapse, burst, still.
Capturing
Same as
x 3
Stopped
Error Occurs
Fast flashing (as on HD2). An error
x 5
can occur during capturing, this LED
pattern will disrupt the capture pattern.
Shutting
Make duration same as
x 6
Down
When the Wi-Fi Remote is connected to more than one
camera, the Remote LED Recording Light will remain lit as
long as at least one camera is capturing video or photos.
HD1, HD2
HD1, HD2.
HD1, HD2
7
12/15/11 7:17 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Armte-001

Table of Contents