Clevo N130WU User Manual page 164

Modules & Options
6
Figure 6 - 29
Camera Settings
6 - 36 PC Camera Module
6. Click Settings to access the camera settings menu to make adjustments for
Camera press and hold button, photo Aspect ratio, Framing grid, Time lapse,
video recording frame rates and Flicker reduction.
Camera Settings
The Self Timer can be set to take Photos after 2, 5 or 10 seconds
and can also be set to continue taking pictures until the camera
button is pressed again (Photo Burst).
The Aspect Ratio can be changed to those the system supports.
You can use a Framing grid to help you line up pictures.
Time lapse can be set to keep taking photos until the camera but-
ton is pressed again.
The Video recording resolution and frame rate can be set to any
supported by the system. Note that capturing high resolution vid-
eo files requires a substantial amount of disk space for each file.
After recording video, check the video file size (right-click the file
and select Properties) and the remaining free space on your hard
disk (go to File Explorer, right-click the hard disk, and select Prop-
erties). If necessary you can remove the recorded video file to a
removable medium e.g. CD, DVD or USB Flash drive.
If you need to reduce any screen flicker, change the settings in
Flicker reduction to either e.g. 50Hz or 60Hz.
