Russell Hobbs RHBI55LF122 Instruction Manual page 16

Installation – Door attachment
4. Open the appliance door and the cabinet door to 90°, insert the door guide
holder (part B) on to the door guide (part A). Push the appliance door and the
cabinet door together and mark 2 holes on the end of the appliance door as
indicated in below (these may be pre-drilled).
5. Pull the appliance door away from the cabinet door (leaving the door guide
holder (part B) still attached to the door guide (part A). Carefully drill 2 x 2mm Φ
pilot holes, 8mm from the outer edge of the door (these may be pre-drilled). Push
the appliance door and the cabinet door together, make sure the door guide
holder (part B) is still attached to the door guide (part A) and fix it with 2 flat
headed screws. If any adjustment that is needed then use the clearance space in
the screw slots of the door guide holder (part B) on to the door guide (part A).
6. Before clipping the door guide holder cover (part D) on to the door guide holder
(part B)you must check that the cabinet door closes correctly. If it does clip the
cover in place.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
16