Multiple Handset Use - VTech DS6151 User Manual

Telephone operation
Redial list
•
room for the new entry.
• Entries are shown in reverse chronological order.
• Press the REDL softkey on the telephone base or REDIAL/
handset to browse the redial list.
Dial a redial entry
Using the telephone base:
1. Press the REDL softkey and then press
number.
2. Press the DIAL softkey to call.
Using the handset:
1. Press REDIAL/ and then press
PAUSE
2. Press the DIAL softkey to call.
Save a redial entry to the directory
Using the telephone base:
1. Press the REDL softkey and then press
or +/DIR to browse the number.
2. Press the SAVE softkey to save.
Using the handset:
1. Press REDIAL/ and then press
PAUSE
2. Press the SAVE softkey to save.
Delete a redial entry to the directory
Using the telephone base:
1. Press the REDL softkey and then press
number.
2. Press the DEL softkey to delete the selected entry.
Using the handset:
1. Press REDIAL/ and then press
PAUSE
2. Press the SAVE softkey to save.
on the
PAUSE
-/CID or +/DIR to browse the
or
to browse the number.
-/CID
or to browse the number.
-/CID or +/DIR to browse the
or to browse the number.
33
Telephone operation

Multiple handset use

You can use up to 4 system handsets at a time on an outside call. If a
handset is already on a call on line 1 or line 2 and you would like to join the
call, press , or 1 LINE/ or 2 LINE/
FLASH
handset to join the call.
To end the call, press OFF or place the handset in the telephone base or
charger. The call will not be terminated until all handsets hang up.
You can buy additional expansion handsets
telephone base. You can register up to 12 handsets to the telephone base.
The first nine handsets that you register are named HANDSETS 1-9. Use
the handset number to intercom and transfer calls. Although the names
for handsets 10-12 appear in their displays as 10-12, when you intercom
or transfer to one of them, you must use *0 for HANDSET 10, *1 for
HANDSET 11, and *2 for HANDSET 12.
respectively on another
FLASH
(model DS6101) for this
34