Number Of Rings - VTech DS6151 User Manual

Answering System Settings
Call Screening
Call Screening allows you to hear the annoncement and
the incoming message when a call comes. You have to
make sure the call screening feature and the answering
system are both turned on. You may turn this feature on
or off with either your handset or telephone base. Unless
you change it, the call screening feature is set to on.
To change the setting:
Using the telephone base:
1. Press the MENU softkey when the telephone base is
not in use.
+/DIR to select > Answering Sys,
2. Press -/CID or
then press the OK softkey.
3. To turn on or off the call screening of Line 1, press
+/DIR to select > Line 1.
-/CID or
-OR-
To turn on or off the call screening of Line 2, press
+/DIR to select > Line 2.
-/CID or
Then press the OK softkey.
+/DIR to select > Call Screening,
4. Press -/CID or
then press the OK softkey.
+/DIR to select > ON or > OFF, then
5. Press -/CID or
press the SET
the BACK softkey to exit to the previous menu without
making any changes.
Using the handset:
1. Press the MENU softkey to show the menu when the
handset is not in use.
to select > Answering Sys, then press the
2. Press or
OK softkey.
3. To turn on or off the call screening of Line 2, press
to select > Line 1.
or
-OR-
To turn on or off the call screening of Line 2, press
to select > Line 2.
or
Then press the OK softkey.
to select >Call Screening , then press the
4. Press or
OK softkey.
to select > ON or > OFF, then press the SET
5. Press or
exit to the previous menu without making any changes.
>Answering Sys
BACK
ANSWERING SYS
>Line 1
Line 2
BACK
Announcement
>Call Screening
# of Rings
BACK
Call Screening
>ON
OFF
BACK
>Answering Sys
Directory
Call Log
Ringers
BACK
ANSWERING SYS
>Line 1
Line 2
BACK
LINE 1 SETUP
Answer ON/OFF
Announcement
>Call Screening
BACK
CALL SCREENING
>ON
OFF
BACK softkey to
BACK
25
Answering System Settings

Number of rings

You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new
messages. This enables you to check for new messages
and avoid paying unnecessary long distance charges if
MENU
you are calling from out of your local area.
To change the setting:
Using the telephone base:
1. Press the MENU softkey when the telephone base is
OK
not in use.
2. Press
then press the OK softkey.
3. To change the setting on Line1, press
+/DIR to select > Line 1.
OK
-OR-
To change the settng on Line 2, press
+/DIR to select > Line 2.
Then press the OK softkey.
SET
4. Press
press the OK softkey.
5. Press
Saver, then press the SET
or press the BACK softkey to exit to the previous menu
without making any changes.
Using the handset:
OK
1. Press the MENU softkey to show the menu when the
handset is not in use.
2. Press
OK softkey.
3. To change the setting on Line1, press
OK > Line 1.
-OR-
To change the settng on Line 2, press
> Line 2.
Then press the OK softkey. then press the OK softkey.
OK
4. Press
softkey.
5. Press
press the SET
BACK softkey to exit to the previous menu without
OK
making any changes.
+/DIR to select > Answering Sys,
-/CID or
-/CID or
-/CID or
+/DIR to select > #of Rings, then
-/CID or
-/CID or +/DIR to select >2, >4 , >6, or >Toll
to select > Answering Sys, then press the
or
or
or
to select ># of Rings , then press the OK
or
or to select >2, >4 , >6, or >Toll Saver, then
26
>Answering Sys
MENU
BACK
ANSWERING SYS
>Line 1
Line 2
BACK OK
>Call Screening
Announcement
# of Rings
BACK OK
# of RINGS
>2
4
BACK SET
>Answering Sys
Directory
Call Log
Ringers
BACK OK
ANSWERING SYS
>Line 1
Line 2
to select
BACK OK
LINE 1 SETUP
to select
Call Screening
Announcement
># of Rings
BACK OK
# of RINGS
>2
4
6
BACK SET