Pfaff 3371-1 series Adjustment Manual page 9

Call up parameter "609".
Checking the "X-direction"
Move along the maximum set sewing area size in "X-direction" by pressing the
corresponding plus/minus keys.
If necessary adjust the position of work clamp 1 by entering a correction value "X" with
the corresponding plus/minus keys in "X-direction" in accordance with the
requirement.
TE
Conclude the input.
When using the max. sewing area size (X=40mm, X =20 mm), the correction
value under parameter "609" must be set at "0".
Adjustment
14 - 6