Storing An Item Using The Dialing - Panasonic KX-TGP600 User Manual

USER GUIDE
Panasonic DECT KX-TGP600 User Guide

Storing an Item Using the Dialing

You can dial a number first and then add it as a phonebook entry .
[In standby mode]
1 . Dial a number .
2 .
3 . Enter a name (max . 24 characters) . →
4 . [▲]/[▼]: Select a phone number type (1 to 5) . →
5 . Edit the phone number if desired . →
6 . Repeat steps 4 and 5 to add additional phone number types .
7 . [▲]/[▼]: "Category Off" →
8 . Select a category . →
9 . To select a default number for the entry, press [▲] or [▼] to select "Default TEL No" →
10 . [▲]/[▼]:: Select the number to use as the default number . →
11 .
Note:
• Steps 7 and 8 can be omitted if you do not want to assign a category .
• Steps 9 and 10 can be omitted if you do not want to assign a default number . (The first number entered for an entry will automatically be
assigned as the default number . )
• The valid digits are "0" through "9", "g", "#", "+", "P" .
• If an item with the same name and number exists, the new information added will be merged with the existing item .
Storing an Item Using the Incoming or Outgoing Call Log
You can add a number listed in the Incoming or Outgoing Call Log to the Handset Phonebook .
[In standby mode]
1 . Display the incoming or outgoing call log . For details, see
2 . [▲]/[▼]: Select the desired item . →
3 . [▲]/[▼]: "Save Phonebook" →
4 . Edit the name if desired . →
5 . [▲]/[▼]: Select a phone number type (1 to 5) . →
6 . Edit the phone number if desired . →
7 . Repeat steps 5 and 6 to add additional phone number types .
8 . [▲]/[▼]: "Category Off" →
9 . Select a category . →
10 . To select a default number for the entry, press [▲] or [▼] to select "Default TEL No" →
11 . [▲]/[▼]: Select the number to use as the default number . →
20
"Appendix A" on page 25 .