Parallel Communication; Aux Function; Audio From External Audio To All - Vingtor CTB-100V Installation & User Manual

Installation & User Manual

2.4.8 Parallel communication

2.4.9 AUX function

AUX

2.4.10 Audio from external audio to All

2 3
Function with operation from parallel microphone / loudspeaker
located on bridge wings, or other locations where parallel
microphone / loudspeaker needed.
Note! Line selection have to be set up from the operation panel.
External entertainment, message or alarm can be distributed trough the
CTB system by using push button switch "AUX" together with line
selection switches.
0dB signal from the external system connected to the CTB system will
be addressed to selected substations.
The TALK button on operation panels or PTT button on hand
microphone will override the AUX to giving a all call message.
External system can be:
•
•
Alarm (or any audio) from external system can be distributed trough the
CTB system.
An potentional free contact and 0dB signal from the external system
activate the CTB and the message will be addressed to all substations and
operation panels.
The talk button on the operation panel or PTT button on hand
microphone will override the external audio.
Normal talk back functions can not be used in this mode.
4 11
External system can be:
•
•
Note! Only the operator of the external system can switch of the external
10 20
audio.
VHF radio System
Entertainment system.
Alarm system.
External Public Address System
System CTB-100V
6