Parallel Communication - Vingtor CTB-100V Installation & User Manual

Installation & User Manual
4.2

Parallel communication

Function with operation from parallel microphone / loudspeaker located on bridge wings,
or other locations near the operation panel, where parallel microphone / loudspeaker needed.
Two parallel stations can be connected. Communication is set up by the operationpanel.
Bridge wing unit will be in operation mode as soon as a station is selected on the operationpanel.
Figure 9 Parallel station STB-6
2
1
1. Loudspeaker (Parallel to the central unit)
2. Contact For microphone
3. Microphone ETC-1-TB with PTT switch
PTT switch = Push to talk button switch
Figure 10 Parallel station SB-4
3
1
2
1. Loudspeaker (Parallel to the central unit)
2. Contact For microphone
3. Microphone Microphone P-66 with push to talk switch
(parallel to microphone on the central unit
PTT switch = Push to talk button switch
Figure 10 Parallel station STB-6GN
2
1
1. Loudspeaker (Parallel to the central unit)
2. TALK PTT switch for microphone
(Parallel to the central unit)
3. Footswitch (Parallel to PTT switch )
PTT switch = Push to talk button switch
3
System CTB-100V
3
30