Installation & User Manual
4.3.5 Operation from STB-5GN
Substation
Loudspeaker
4.3.6 Operation from HE-112M / HE-112MT
Substation
Loudspeaker
•
Press the CALL button.
•
Indicated with flashing green LED
and a signal in the operation panels
speaker for selected line.
•
Operator of the operation panel press
respective LINE button, the call is set
up. Indicated by steady green light,
•
Press TALK button on the STB-5GN
Speak clearly into the microphone.
When TALK button is released the
STB-5GN will be in listening mode,
and you will hear the communication
from the selected station in the monitor
loudspeaker.
•
Operator of the operation panel end
the call by pressing the LINE button
once more .
•
Press CALL button.
•
Indicated with flashing green LED
and a signal in the operation panels
speaker for selected line.
•
Operator of the operation panel press
respective LINE button, the call is set
up. Indicated by steady green light.
•
Speak clearly into the
Re-entrant loudspeaker for
communication to the operation panel,
and receive communication in the same
loudspeaker.
•
Operator of the operation panel end
the call by pressing the LINE button
once more .
System CTB-100V
Operationpanel
Operationpanel
38