WPM System
USER GUIDE
Position the second cabinet on top of the first, aligning the front rigging points. Secure with Rigging Pins at each side. Set
the inter-cabinet angle according to the DISPLAY software prediction. Continue to add further cabinets one at a time to the
ground stack, securing the front rigging points with Rigging Pins and setting the inter-cabinet angles as you go along, until
the ground stack is complete.
Fig.28 - attach second cabinet
Fig.30 - attach fourth cabinet
WPM User Guide v1.0
Fig.29 - attach third cabinet
Fig.31 - attach fifth cabinet
Page 43