Other Functions; Temp. Display Setting; Buzzer Indicator Select; Dimmer Set - Hisense YXE-C02U Use And Installation Instructions

OTHER FUNCTIONS

TEMPERATURE DISPLAY SETTING
Default display set temperature .
If need display room temperature, press " " button and"ENTER"button
simultaneously for 3 seconds,the buzzer beeps 4 times indicating setting has
been changed. appears on the LCD,temperature shown on LCD is room
temperature.
If need cancel setting, press " " button and" ENTER "button simultaneously
for 3 seconds, disappears on the LCD,indicating displaying setting tempe-
rature.

BUZZER INDICATOR SELECT

Default buzzer indicate when operation.If need operation mute ，hold down
"FAN"button for 3 seconds，the buzzer beeps 4 times indicating setting has been
successfully changed.
If need return to normal，repeat steps above.

DIMMER SET

Default bright screen.If need screen darkness ，hold down"MODE"
button for 3seconds，the buzzer beeps 4 times indicating setting has been
successfully changed.
If need return to normal ，repeat steps above.

FILTER CLEAN RESET

(available for models equipped with filter clean function and need operate by professional stuff）
When displays on LCD,indicates that the filiter needs to be cleaned.
Please contact with professional stuff to do filter cleaning.After cleaning,
hold down"CANCEL"button 3 seconds,the buzzer beeps 4 times indicating
FILTER CLEAN has been successfully reset.
FILER CLEAN is only effective for specific models . Details please refer to indoor unit manuals.
Be sure to stop the operation and turn off the power supply before performing any cleaning.
14