TagTemp Stick
6 MOST FREQUENTLY FOUND PROBLEMS
The LED is not flashing: The LED flashing light is intentionally
weak, and it can be difficult to see it in clear environments, certify it is
really not flashing.
Communication with the equipment fails:
Make sure the COM port is selected correctly and there is no other
program using the same port during communication attempts;
Make sure there is no physical obstacle blocking the infrared signal;
Make sure the port selected does not present any problem.
7 SPECIAL CARE
When handling the device and its battery, observe the following:
To achieve the IP67 protection degree the cover of TagTemp Stick
should always be kept properly closed.
8 WARRANTY
Warranty
conditions
are
available
on
our
web
site
www.novusautomation.com/warranty.
NOVUS AUTOMATION
5/5
Need help?
Do you have a question about the TagTemp Stick and is the answer not in the manual?