Yaesu ZCUT-6 Instruction Manual
  1. Manuals
  2. Brands
  3. Yaesu Manuals
  4. Dispenser
  5. ZCUT-6
  6. Instruction manual
Yaesu ZCUT-6 Instruction Manual

Yaesu ZCUT-6 Instruction Manual

Automatic tape dispenser
Hide thumbs
Table of Contents

Advertisement

Quick Links

YAESU KEIKOGYO CO., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZCUT-6 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Yaesu ZCUT-6

Summary of Contents for Yaesu ZCUT-6

  • Page 1 YAESU KEIKOGYO CO., LTD.

  • Page 2: Identification Of Parts

    IDENTIFICATION OF PARTS SILICON SPONGE ROLLER TAPE FEED ROLLER CUTTER BLADE SCREW SAFETY SW FRONT PANEL SCREW OVER LOAD ALARM LAMP START SW LENGTH COUNTER ON/OFF SW AUTO / MANUAL SW SAFETY LID BOBBIN HOOK BOBBIN HOLDER INLET FUSE SPARE FUSE FUSE HOLDER...

  • Page 3: Before Use

    INTRODUCTION Thank you for purchasing our Automatic Tape Dispenser ZCUT-6. The ZCUT-6 can cut many types of tape. Before using, please read this instructionmanual carefully to understand our machine. BEFORE USE 1) The ON/OFF SW. must be "OFF". 2) Set the Length Counter for 200mm.

  • Page 4: Operation

    OPERATION 1) Plug into an outlet firmly. 2) Set the ON/OFF SW. for "ON". 3) Press the Start Switch once. 4) Make sure the tape comes from the tape outlet and cutting two or three pieces. ■If the tape can not feed smoothly, or tape winds around roller, turn off 　the ON/OFF SW.

  • Page 5: Safety Switch

    3) Take the wound up tape off by tweezers or pliers. Can turn the roller by hand when the power is off. SAFETY SWITCH When you remove the front panel, the ZCUT-6 will stop automatically for your safety. HOW TO TAKE OFF THE TAPE 1) Open the Safety Lid.

  • Page 6: Maintenance

    EXTREME CARE OF BLADE WARNINGS 1) When not in use, switch the ZCUT-6 "OFF" and unplug it. 2) When performing any maintenance, make sure the ZCUT-6 is "OFF". 3) The ZCUT-6 is designed for tape cutting only. Please do not try to cut other things.

  • Page 7: Specifications

    SPECIFICATIONS POWER REQUIREMENT 100VAC 50/60Hz 120VAC 50/60Hz 400W 220-240VAC 50/60Hz DIMENSIONS 166(W) X 245(H) X 243(D) mm WEIGHT 9.2 KG. CUTTING LENGTH 40-999 mm TAPE WIDTH 15-80 mm FEEDING SPEED 50Hz 44 pcs./min. (100 mm Length) 29 pcs./min. (200 mm Length) 60Hz 47 pcs./min.
  • Page 8 YAESU KEIKOGYO CO., LTD. 39-8, Senju Motomachi, Adachi-Ku, Tokyo, 120-0041, Japan Phone 81-3-3888-8751 81-3-3888-1592 PLEASE VISIT OUR WEB SITE http://www.yaesu1965.com/ 14K17...

Table of Contents