SENAO 3054 PCI Aries User Manual page 20

This chapter describes how to prepare a connection to network after installing the PCI Card drivers
and utility. The following is required for all computers if you want to connect to a network.
1. Check Client for Microsoft Networks is installed.
2. Check Internet Protocol (TCP/IP) is installed.
3. Check File and Printer Sharing for Microsoft Networks is installed.
4. Check Computer Name and Workgroup Name.
Click Start button, select Control Panel to open the Control Panel window. In the Control Panel
window, clicks on the Network and Internet Connections, and then click on Network
Connections to open the Network Connection window. Right-click on WLAN AR5001X+ Wireless
Network Adapter, then select Properties as shown in Figure 3-1.
3-1
Checking and Adding Client for Microsoft Networks
The Client for Microsoft Networks enables you to connect to other Microsoft Windows computers
and servers and use the files and printers shared on them. If you work on Microsoft network
environment, you need to set up Client for Microsoft Windows.
Checking the "The connection uses the following items:" list, if there is the Client for Microsoft
Networks on it. If no, click on Install..., select Client, click on Add..., and select Client for
Microsoft Networks, then click on OK as shown in Figure 3-2, and click on its check box.
Figure 3-1